View XX1007-QT-EV1_4143421.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

13.5-17.0/27.0-34.0 GHz Doubler QFN, 3X3mm
February 2008 - Rev 06-Feb-08
X1007-QT Chip Device Layout
Features
Integrated Gain, Doubler and Driver Stages Single Positive Supply, +5V Integrated Bypassing Capacitor +20.0 dBm Output Saturated Power 35.0 dBc Fundamental Suppression On-Chip ESD Protection 100% RF, DC and Output Power Testing 3x3 QFN Package RoHS Compliant
General Description
Mimix Broadband's 13.5-17.0 / 27.0-34.0 GHz GaAs MMIC doubler integrates a gain stage, passive doubler and driver amplifier onto a single device. The XX1007-QT has a self-biased architecture requiring a single positive supply (+5V) only and integrated on-chip bypassing and DC blocking capacitors eliminating the need for any external components. This device uses Mimix Broadband's 0.15um GaAs PHEMT device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. XX1007-QT has integrated ESD structures for protection and comes in a low cost 3x3mm QFN package. The device is well suited for Millimeter wave Point-to-Point Radio, LMDS, SATCOM and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd) Supply Current (Id) Gate Bias Voltage (Vg) Input Power (RF Pin) Storage Temperature (Tstg) Operating Temperature (Ta) Channel Temperature (Tch)
+6.0 VDC 300 mA +0.3 VDC 10 dBm -65 to +165 OC -55 to MTTF Table1 MTTF Table 1
(1) Channel temperature affects a device's MTTF. It is recommended to keep channel temperature as low as possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 oC)
Parameter Input Frequency Range (fin) Output Frequency Range (fout) Input Return Loss (S11) Output Return Loss (S22) Fundamental Suppression RF Input Power (RF Pin) Output Power at 5.0 dBm Pin (Pout) Drain Bias Voltage (Vd) Supply Current (Id1,2,3) (Vd=5.0V Typical) Units GHz GHz dB dB dBc dBm dBm VDC mA Min. 13.5 27.0 Typ. -8.0 -10.0 -35.0 7.0 +20.0 +5.0 200 Max. 17.0 34.0 +5.5 240
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
13.5-17.0/27.0-34.0 GHz Doubler QFN, 3X3mm
February 2008 - Rev 06-Feb-08
X1007-QT
Doubler Measurements
25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 13
XX1007-QT: Pout at Fin and 2X Fin, Pin = 10 dBm, Vd = 5V
Pout @ Fin Pout @ 2 X Fin
25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 13
XX1007-QT: Pout at Fin and 2X Fin, Pin = 5 dBm, Vd = 5V
Output Power (dBm)
Output Power (dBm)
Pout @ Fin Pout @ 2 X Fin
13.5
14
14.5
15
15.5
16
16.5
17
13.5
14
14.5
15
15.5
16
16.5
17
Input Frequency (GHz)
Input Frequency (GHz)
25 20 15
XX1007-QT: Pout at Fin and 2X Fin, Pin = 0 dBm, Vd = 5V
25 20 15
XX1007-QT: Pout at Fin and 2X Fin, Pin = 3 dBm, Vd = 5V
Output Power (dBm)
5 0 -5 -10 -15 -20 -25 -30 -35 13 13.5 14 14.5 15 15.5 16 16.5 17 Pout @ Fin Pout @ 2 X Fin
Output Power (dBm)
10
10 5 0 -5 -10 -15 -20 -25 -30 -35 13 13.5 14 14.5 15 15.5 16 16.5 17 Pout @ Fin Pout @ 2 X Fin
Input Frequency (GHz)
Input Frequency (GHz)
22 21 20
XX1007-QT: Pout Vs Pin, Vd = 5V, Input Frequency = 14.5 GHz
23 22 21
XX1007-QT: Pout Vs Pin, Input Frequency = 14.5 GHz
Pout (dBm)
Pout (dBm)
19 18 17 16 15 0 1 2 3 4 5 6 7 8 9 10 11
20 19 18 17 16 15 0 1 2 3 4 5 6 7 8 9 10 11
Pout
Pout @ 5V Pout @ 4V
Pin (dBm)
Pin (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
13.5-17.0/27.0-34.0 GHz Doubler QFN, 3X3mm
February 2008 - Rev 06-Feb-08
X1007-QT
Doubler Measurements (cont.)
250 225 XX1007-QT: Idd Vs Pin, Input Frequency = 14.5 GHz 260 250 240 230 220 210 200 190 180 170 160 150 140 130 120 13
XX1007-QT: Idd Vs Input Frequency, Vd = 5V
Current, Idd (mA)
200 175 150 125 100 0 1 2 3 4 5 Pin (dBm) 6 7 8 9 10 Idd @ 4V Idd @ 5V
Current, Idd (mA)
Idd @ Pin = 10dBm Idd @ Pin = 5dBm Idd @ Pin = 0dBm
13.5
14
14.5
15
15.5
16
16.5
17
Input Frequency (GHz)
0 -2 -4
XX1007-QT:
Input Return Loss (S11)
0 -2 -4
Return Loss (dB)
XX1007-QT: Input Return Loss (S22)
Return Loss (dB)
-6 -8 -10 -12 -14 -16 -18 5 10 15 20 25 30 35 40 S11 @ 4V S11 @ 5V
-6 -8 -10 -12 -14 -16 -18 5 10 15 20 25 30 35 40 S22 @ 4V S22 @ 5V
Frequency (GHz)
Frequency (GHz)
0 -2 -4
Return Loss (dB)
XX1007-QT: Input Return Loss (S11)
0 -2 -4
Return Loss (dB)
XX1007-QT: Input Return Loss (S22)
-6 -8 -10 -12 -14 -16 -18 13 13.5 14 14.5 15 15.5 16 16.5 17 S11 @ 4V S11 @ 5V
-6 -8 -10 -12 -14 -16 -18 27 28 29 30 31 32 33 34 S22 @ 4V S22 @ 5V
Frequency (GHz)
Frequency (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
13.5-17.0/27.0-34.0 GHz Doubler QFN, 3X3mm
February 2008 - Rev 06-Feb-08
X1007-QT Pin Designation
Functional Block Diagram
Pin Number 3 10 13 1,2,4,5,6,7,8,9 11,12,14,15,16
Function RF in RF out Vd NC NC
Typ. Value 5 20 5
Unit dBm dBm V
NC: No Connection
Physical Dimensions
XX1007-QT wwwwwww PxxxxG
Top View
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
13.5-17.0/27.0-34.0 GHz Doubler QFN, 3X3mm
February 2008 - Rev 06-Feb-08
X1007-QT
Evaluation Board Layout
Vd
RF in
RF out
MTTF Tables (TBD)
Backplate Temperature 75 deg Celsius
These numbers were calculated based on accelerated life test information and thermal model analysis received from the fabricating foundry.
Channel Temperature 192 deg Celsius
Rth
MTTF Hours
FITs
126 C/W
3.4 E+06
2.9 E+02
Bias Conditions: Vd=5.0V, Id=200mA
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
13.5-17.0/27.0-34.0 GHz Doubler QFN, 3X3mm
February 2008 - Rev 06-Feb-08
X1007-QT
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. The package is a low-cost plastic package. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Typical Reflow Profiles Reflow Profile Ramp Up Rate Activation Time and Temperature Time Above Melting Point Max Peak Temperature Time Within 5 C of Peak Ramp Down Rate SnPb 3-4 C/sec 60-120 sec @ 140-160 C 60-150 sec 240 C 10-20 sec 4-6 C/sec Pb Free 3-4 C/sec 60-180 sec @ 170-200 C 60-150 sec 265 C 10-20 sec 4-6 C/sec
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes.
Ordering Information
Part Number for Ordering XX1007-QT-0G00 XX1007-QT-0G0T XX1007-QT-EV1 Description Matte Tin plated RoHS compliant QFN 3x3 16L surface mount package in bulk quantity Matte Tin plated RoHS compliant QFN 3x3 16L surface mount package in tape and reel XX1007-QT Evaluation Board
We also offer this part with alternative plating. Please contact your regional sales manager for more information regarding different plating types.
Caution: ESD Sensitive
Appropriate precautions in handling, packaging and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.

▲Up To Search▲

Price & Availability of XX1007-QT-EV1

	To Download XX1007-QT-EV1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .